Bambu Lab P1S Slicer Profile for Overture PLA
The Bambu Lab P1S printing Overture PLA (PLA) performs best at 210°C nozzle / 60°C bed with 0.6mm retraction. Tested by PrintFarmSteve.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 210°C | 200–220°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 16 mm³/s | — |
| Chamber Temperature | 40°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab P1S | Brand | Overture |
| Type | Enclosed CoreXY | Material | PLA (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 50°C / 4hrs |
| Filament Price | $18–$28/kg | Material | PLA |
💡 Maker's Notes: Overture PLA is a forgiving, low-cost workhorse on the P1S. Wide temperature window and consistent flow make it ideal for long unattended prints. Textured PEI plate, no glue needed.
🔗 Other Filaments for Bambu Lab P1S
3D-Fuel Carbon Fiber Nylon — 275°C / 100°C bed • PA-CFColorFabb HT — 250°C / 80°C bed • Co-PolyesterColorFabb PLA/PHA — 215°C / 60°C bed • PLA-PHAeSun ABS+ — 255°C / 100°C bed • ABSeSun PLA+ — 210°C / 60°C bed • PLAeSun PLA Matte — 210°C / 60°C bed • PLA