Bambu Lab P1S Slicer Profile for ColorFabb HT
The Bambu Lab P1S printing ColorFabb HT (Co-Polyester) performs best at 250°C nozzle / 80°C bed with 0.8mm retraction. Tested by PrintFarmSteve.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 250°C | 230–270°C |
| Bed Temperature | 80°C | 70–90°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 35 mm/s | — |
| Max Volumetric Speed | 14 mm³/s | — |
| Chamber Temperature | 55°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab P1S | Brand | ColorFabb |
| Type | Enclosed CoreXY | Material | HT (Co-Polyester) |
| Drive | Direct Drive | Density | 1.18 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 75°C / 8hrs |
💡 Maker's Notes: ColorFabb HT (High Temp) is co-polyester with superior heat resistance. Prints like PETG but with higher temp stability. Suitable for automotive parts exposed to 100°C+ environments per ColorFabb HT datasheet CF-HT-2024.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab P1S
eSun PLA+ — 210°C / 60°C bed • PLASunlu PETG — 240°C / 80°C bed • PETGPolymaker PolyLite PLA — 205°C / 60°C bed • PLAOverture ASA — 250°C / 100°C bed • ASAeSun TPU 95A — 230°C / 50°C bed • TPUPolymaker PolyMax PC — 270°C / 110°C bed • PC