Bambu Lab P1S Slicer Profile for eSun TPU 95A
Reference starting points for Bambu Lab P1S and eSun TPU 95A: 230°C nozzle / 50°C bed, with 1.5mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 230°C | 220–240°C |
| Bed Temperature | 50°C | 40–60°C |
| Retraction Distance | 1.5 mm | — |
| Retraction Speed | 25 mm/s | — |
| Max Volumetric Speed | 3 mm³/s | — |
| Chamber Temperature | 30°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab P1S | Brand | eSun |
| Type | Enclosed CoreXY | Material | TPU 95A (TPU) |
| Drive | Direct Drive | Density | 1.2 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 55°C / 6hrs |
| Material | TPU | Filament Brand | eSun |
💡 Maker's Notes: TPU requires SLOW speeds. Disable retraction entirely for best results. Use engineering plate with glue
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab P1S
3D-Fuel Carbon Fiber Nylon — 275°C / 100°C bed • PA-CFColorFabb HT — 250°C / 80°C bed • Co-PolyesterColorFabb PLA/PHA — 215°C / 60°C bed • PLA-PHAeSun ABS+ — 255°C / 100°C bed • ABSeSun PLA+ — 210°C / 60°C bed • PLAeSun PLA Matte — 210°C / 60°C bed • PLA