Bambu Lab P1S Slicer Profile for 3D-Fuel Carbon Fiber Nylon
Reference starting points for Bambu Lab P1S and 3D-Fuel Carbon Fiber Nylon: 275°C nozzle / 100°C bed, with 0.8mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 275°C | 260–290°C |
| Bed Temperature | 100°C | 90–110°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 35 mm/s | — |
| Max Volumetric Speed | 12 mm³/s | — |
| Chamber Temperature | 60°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab P1S | Brand | 3D-Fuel |
| Type | Enclosed CoreXY | Material | Carbon Fiber Nylon (PA-CF) |
| Drive | Direct Drive | Density | 1.15 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 85°C / 12hrs |
| Material | PA-CF | Filament Brand | 3D-Fuel |
💡 Maker's Notes: Carbon fiber nylon is abrasive — hardened nozzle mandatory. Dry filament 12 hours before use. Layer adhesion requires 60°C chamber. Excellent for functional parts per 3D-Fuel technical bulletin 3DF-NYLON-CF-2024.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab P1S
ColorFabb HT — 250°C / 80°C bed • Co-PolyesterColorFabb PLA/PHA — 215°C / 60°C bed • PLA-PHAeSun ABS+ — 255°C / 100°C bed • ABSeSun PLA+ — 210°C / 60°C bed • PLAeSun PLA Matte — 210°C / 60°C bed • PLAeSun TPU 95A — 230°C / 50°C bed • TPU