Bambu Lab P1S Slicer Profile for eSun PLA+
The Bambu Lab P1S printing eSun PLA+ (PLA) performs best at 210°C nozzle / 60°C bed with 0.8mm retraction. Tested by PrintFarmSteve.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 210°C | 200–220°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 15 mm³/s | — |
| Chamber Temperature | 45°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab P1S | Brand | eSun |
| Type | Enclosed CoreXY | Material | PLA+ (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 50°C / 4hrs |
💡 Maker's Notes: Reduce retraction to 0.4mm for Silk PLA variants
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab P1S
Sunlu PETG — 240°C / 80°C bed • PETGPolymaker PolyLite PLA — 205°C / 60°C bed • PLAOverture ASA — 250°C / 100°C bed • ASAeSun TPU 95A — 230°C / 50°C bed • TPUPolymaker PolyMax PC — 270°C / 110°C bed • PCSunlu ABS — 250°C / 100°C bed • ABS