Bambu Lab P1S Slicer Profile for FormFutura EasyFil HIPS
The Bambu Lab P1S printing FormFutura EasyFil HIPS (HIPS) performs best at 245°C nozzle / 100°C bed with 0.8mm retraction. Tested by PrintFarmSteve.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 245°C | 230–260°C |
| Bed Temperature | 100°C | 90–110°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 15 mm³/s | — |
| Chamber Temperature | 50°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab P1S | Brand | FormFutura |
| Type | Enclosed CoreXY | Material | EasyFil HIPS (HIPS) |
| Drive | Direct Drive | Density | 1.04 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 80°C / 6hrs |
| Filament Price | $20–$30/kg | Material | HIPS |
💡 Maker's Notes: HIPS is dissolvable in limonene — used as support material for ABS prints. Prints at ABS-like temperatures. Lower shrinkage than ABS. Excellent support interface quality per FormFutura guide FF-HIPS-2024.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab P1S
3D-Fuel Carbon Fiber Nylon — 275°C / 100°C bed • PA-CFColorFabb HT — 250°C / 80°C bed • Co-PolyesterColorFabb PLA/PHA — 215°C / 60°C bed • PLA-PHAeSun ABS+ — 255°C / 100°C bed • ABSeSun PLA+ — 210°C / 60°C bed • PLAeSun PLA Matte — 210°C / 60°C bed • PLA