Prusa XL Slicer Profile for Fillamentum PLA Extrafill
Reference starting points for Prusa XL and Fillamentum PLA Extrafill: 210°C nozzle / 60°C bed, with 0.8mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 210°C | 200–220°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 20 mm³/s | — |
| Chamber Temperature | 35°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Prusa XL | Brand | Fillamentum |
| Type | Enclosed CoreXY | Material | PLA Extrafill (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Brass 0.4mm | Drying | 50°C / 4hrs |
| Material | PLA | Filament Brand | Fillamentum |
💡 Maker's Notes: Fillamentum PLA Extrafill on the Prusa XL — vibrant colors at large scale. The XL's 5-tool head enables multi-color prints with Fillamentum's rich color palette. Excellent color consistency across the 360mm bed.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Prusa XL
eSun PLA+ — 215°C / 60°C bed • PLAPolymaker PolyLite ABS — 255°C / 105°C bed • ABSPolymaker PolyLite PETG — 250°C / 85°C bed • PETGPrusament PETG — 250°C / 85°C bed • PETGPrusament PLA — 215°C / 60°C bed • PLA