Prusa XL Slicer Profile for eSun PLA+
The Prusa XL printing eSun PLA+ (PLA) performs best at 215°C nozzle / 60°C bed with 0.8mm retraction. Tested by XLMaster.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 215°C | 205–225°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 22 mm³/s | — |
| Chamber Temperature | 35°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Prusa XL | Brand | eSun |
| Type | Enclosed CoreXY | Material | PLA+ (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Brass 0.4mm | Drying | 50°C / 4hrs |
| Filament Price | $18–$28/kg | Material | PLA |
💡 Maker's Notes: eSun PLA+ on the Prusa XL — the 360mm build volume handles large PLA+ prints with ease. The XL's Nextruder and Input Shaper push flow to 22mm3/s. Open the enclosure door for PLA to prevent heat creep.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Prusa XL
Fillamentum PLA Extrafill — 210°C / 60°C bed • PLAPolymaker PolyLite ABS — 255°C / 105°C bed • ABSPolymaker PolyLite PETG — 250°C / 85°C bed • PETGPrusament PETG — 250°C / 85°C bed • PETGPrusament PLA — 215°C / 60°C bed • PLA