Creality K1 Slicer Profile for Prusament PETG
Reference starting points for Creality K1 and Prusament PETG: 250°C nozzle / 85°C bed, with 0.8mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 250°C | 240–260°C |
| Bed Temperature | 85°C | 80–90°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 16 mm³/s | — |
| Chamber Temperature | 40°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Creality K1 | Brand | Prusament |
| Type | Enclosed CoreXY | Material | PETG (PETG) |
| Drive | Direct Drive | Density | 1.27 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 65°C / 6hrs |
| Material | PETG | Filament Brand | Prusament |
💡 Maker's Notes: Prusament PETG's tight diameter tolerance lets the K1 push flow higher than generic PETG. Enclosure holds chamber heat so layer adhesion is excellent. Dry the spool first — PETG hygroscopy ruins surface finish.
🔗 Other Filaments for Creality K1
eSun ASA — 255°C / 105°C bed • ASAeSun PLA+ — 220°C / 60°C bed • PLAHyper PLA Creality — 230°C / 55°C bed • PLA-HSJessie PETG — 250°C / 80°C bed • PETGJessie PLA — 220°C / 60°C bed • PLAOverture TPU — 235°C / 55°C bed • TPU