Creality K1 Slicer Profile for Hyper PLA Creality
Reference starting points for Creality K1 and Hyper PLA Creality: 230°C nozzle / 55°C bed, with 0.5mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 230°C | 220–240°C |
| Bed Temperature | 55°C | 50–60°C |
| Retraction Distance | 0.5 mm | — |
| Retraction Speed | 50 mm/s | — |
| Max Volumetric Speed | 32 mm³/s | — |
| Chamber Temperature | 45°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Creality K1 | Brand | Hyper PLA |
| Type | Enclosed CoreXY | Material | Creality (PLA-HS) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 50°C / 4hrs |
| Material | PLA-HS | Filament Brand | Hyper PLA |
💡 Maker's Notes: K1 Hyper PLA is engineered for high-speed. Max flow 32mm³/s at 230°C — push it
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Creality K1
eSun ASA — 255°C / 105°C bed • ASAeSun PLA+ — 220°C / 60°C bed • PLAJessie PETG — 250°C / 80°C bed • PETGJessie PLA — 220°C / 60°C bed • PLAOverture TPU — 235°C / 55°C bed • TPUPolymaker PolyLite ABS — 255°C / 105°C bed • ABS