Bambu Lab X1E Slicer Profile for eSun ABS+
Reference starting points for Bambu Lab X1E and eSun ABS+: 260°C nozzle / 105°C bed, with 0.5mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 260°C | 250–270°C |
| Bed Temperature | 105°C | 95–115°C |
| Retraction Distance | 0.5 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 22 mm³/s | — |
| Chamber Temperature | 60°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab X1E | Brand | eSun |
| Type | Enclosed CoreXY | Material | ABS+ (ABS) |
| Drive | Direct Drive | Density | 1.04 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 85°C / 8hrs |
| Material | ABS | Filament Brand | eSun |
💡 Maker's Notes: eSun ABS+ on the X1E — the 60°C chamber temperature makes ABS+ print like PLA. Higher impact strength than standard ABS. The X1E's 320°C nozzle enables high-flow ABS+ at 22mm3/s. No warping at all.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab X1E
Bambu Lab ASA — 265°C / 105°C bed • ASAeSun PLA+ — 220°C / 60°C bed • PLAOverture PETG — 250°C / 85°C bed • PETGOverture Silk PLA — 215°C / 60°C bed • PLA-SilkPolymaker PolyLite ABS — 260°C / 105°C bed • ABSPolymaker PolyMax PC — 285°C / 110°C bed • PC