Bambu Lab X1E Slicer Profile for eSun PLA+
The Bambu Lab X1E printing eSun PLA+ (PLA) performs best at 220°C nozzle / 60°C bed with 0.5mm retraction. Tested by X1Expert.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 220°C | 210–230°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.5 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 22 mm³/s | — |
| Chamber Temperature | 35°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab X1E | Brand | eSun |
| Type | Enclosed CoreXY | Material | PLA+ (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 50°C / 4hrs |
| Filament Price | $18–$28/kg | Material | PLA |
💡 Maker's Notes: eSun PLA+ on the X1E — the 320°C nozzle and 60°C chamber are overkill for PLA but the X1E's flow compensation handles PLA+ beautifully. Open top glass for PLA. Push flow to 22mm3/s with confidence.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab X1E
Bambu Lab ASA — 265°C / 105°C bed • ASAeSun ABS+ — 260°C / 105°C bed • ABSOverture PETG — 250°C / 85°C bed • PETGOverture Silk PLA — 215°C / 60°C bed • PLA-SilkPolymaker PolyLite ABS — 260°C / 105°C bed • ABSPolymaker PolyMax PC — 285°C / 110°C bed • PC