Bambu Lab X1E Slicer Profile for Polymaker PolyMax PC
Reference starting points for Bambu Lab X1E and Polymaker PolyMax PC: 285°C nozzle / 110°C bed, with 0.6mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 285°C | 270–310°C |
| Bed Temperature | 110°C | 100–120°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 14 mm³/s | — |
| Chamber Temperature | 60°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab X1E | Brand | Polymaker |
| Type | Enclosed CoreXY | Material | PolyMax PC (PC) |
| Drive | Direct Drive | Density | 1.2 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 90°C / 12hrs |
| Material | PC | Filament Brand | Polymaker |
💡 Maker's Notes: X1E's 320°C nozzle unlocks polycarbonate printing that X1C can barely reach. 60°C chamber prevents PC warping. Dry 12 hours before use. Only possible on X1E in Bambu lineup
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab X1E
Bambu Lab ASA — 265°C / 105°C bed • ASAeSun ABS+ — 260°C / 105°C bed • ABSeSun PLA+ — 220°C / 60°C bed • PLAOverture PETG — 250°C / 85°C bed • PETGOverture Silk PLA — 215°C / 60°C bed • PLA-SilkPolymaker PolyLite ABS — 260°C / 105°C bed • ABS