Anycubic Kobra 3 Max Slicer Profile for Sunlu PETG
The Anycubic Kobra 3 Max printing Sunlu PETG (PETG) performs best at 240°C nozzle / 80°C bed with 1.0mm retraction. Tested by KobraKid.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 240°C | 230–250°C |
| Bed Temperature | 80°C | 70–85°C |
| Retraction Distance | 1.0 mm | — |
| Retraction Speed | 30 mm/s | — |
| Max Volumetric Speed | 8 mm³/s | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Anycubic Kobra 3 Max | Brand | Sunlu |
| Type | Bed Slinger | Material | PETG (PETG) |
| Drive | Direct Drive | Density | 1.27 g/cm³ |
| Nozzle | Bronze 0.4mm | Drying | 65°C / 6hrs |
| Filament Price | $20–$30/kg | Material | PETG |
💡 Maker's Notes: PETG on the Kobra 3 Max open frame — use a draft shield. The 420mm bed makes warping more likely with PETG. Slow speed to 50mm/s. Textured PEI plate recommended. Print in a warm, draft-free room.
🔗 Other Filaments for Anycubic Kobra 3 Max
eSun PLA+ — 210°C / 60°C bed • PLAOverture Easy PLA — 205°C / 60°C bed • PLAPolymaker PolyTerra PLA — 205°C / 55°C bed • PLA