Anycubic Kobra 3 Max Slicer Profile for Polymaker PolyTerra PLA
Reference starting points for Anycubic Kobra 3 Max and Polymaker PolyTerra PLA: 205°C nozzle / 55°C bed, with 0.8mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 205°C | 195–215°C |
| Bed Temperature | 55°C | 50–60°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 14 mm³/s | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Anycubic Kobra 3 Max | Brand | Polymaker |
| Type | Bed Slinger | Material | PolyTerra PLA (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Bronze 0.4mm | Drying | 50°C / 4hrs |
| Material | PLA | Filament Brand | Polymaker |
💡 Maker's Notes: PolyTerra PLA on the Kobra 3 Max — eco-friendly matte finish at large scale. The 420mm bed produces impressive single-piece prints. Lower bed temp (55C) helps with the large surface area. Minimal stringing.
🔗 Other Filaments for Anycubic Kobra 3 Max
eSun PLA+ — 210°C / 60°C bed • PLAOverture Easy PLA — 205°C / 60°C bed • PLASunlu PETG — 240°C / 80°C bed • PETG