Creality K2 Slicer Profile for Polymaker PolyLite PETG
Reference starting points for Creality K2 and Polymaker PolyLite PETG: 250°C nozzle / 80°C bed, with 0.8mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 250°C | 240–260°C |
| Bed Temperature | 80°C | 75–85°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 18 mm³/s | — |
| Chamber Temperature | 45°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Creality K2 | Brand | Polymaker |
| Type | Enclosed CoreXY | Material | PolyLite PETG (PETG) |
| Drive | Direct Drive | Density | 1.27 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 65°C / 6hrs |
| Material | PETG | Filament Brand | Polymaker |
💡 Maker's Notes: PolyLite PETG on the K2 — the sealed chamber and 350°C nozzle enable consistent PETG flow at high speeds. Dry filament thoroughly. Textured PEI plate recommended for the large bed.
🔗 Other Filaments for Creality K2
eSun ABS+ — 255°C / 105°C bed • ABSeSun PLA+ — 220°C / 60°C bed • PLAOverture ASA — 260°C / 105°C bed • ASAPolymaker PolyLite ABS — 260°C / 105°C bed • ABS