Bambu Lab A1 Slicer Profile for Polymaker PolyTerra PLA
The Bambu Lab A1 printing Polymaker PolyTerra PLA (PLA) performs best at 210°C nozzle / 55°C bed with 0.6mm retraction. Tested by MiniMaker.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 210°C | 200–220°C |
| Bed Temperature | 55°C | 50–60°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 18 mm³/s | — |
| Chamber Temperature | 35°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab A1 | Brand | Polymaker |
| Type | Open Bed Slinger | Material | PolyTerra PLA (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Stainless Steel 0.4mm | Drying | 50°C / 4hrs |
| Filament Price | $18–$28/kg | Material | PLA |
💡 Maker's Notes: PolyTerra PLA is a superb budget match for the A1 — low stringing at default speeds and the matte colors hide layer lines. Use the textured PEI plate for best first-layer adhesion on this open frame.
🔗 Other Filaments for Bambu Lab A1
Bambu Lab PETG Basic — 255°C / 80°C bed • PETGBambu Lab PLA Basic — 220°C / 60°C bed • PLADuramic PLA — 215°C / 60°C bed • PLAeSun PLA+ — 225°C / 60°C bed • PLA