Bambu Lab A1 Slicer Profile for Duramic PLA
Reference starting points for Bambu Lab A1 and Duramic PLA: 215°C nozzle / 60°C bed, with 0.6mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 215°C | 205–225°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 18 mm³/s | — |
| Chamber Temperature | 35°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab A1 | Brand | Duramic |
| Type | Open Bed Slinger | Material | PLA (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Stainless Steel 0.4mm | Drying | 50°C / 4hrs |
| Material | PLA | Filament Brand | Duramic |
💡 Maker's Notes: Duramic PLA on the A1 — a reliable budget PLA that prints cleanly at standard Bambu PLA settings. Good diameter consistency. The A1's open frame is ideal for PLA. Use textured PEI plate for best adhesion.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab A1
Bambu Lab PETG Basic — 255°C / 80°C bed • PETGBambu Lab PLA Basic — 220°C / 60°C bed • PLAeSun PLA+ — 225°C / 60°C bed • PLAPolymaker PolyTerra PLA — 210°C / 55°C bed • PLA