Bambu Lab A1 Combo Slicer Profile for Bambu Lab PETG Basic
Reference starting points for Bambu Lab A1 Combo and Bambu Lab PETG Basic: 255°C nozzle / 80°C bed, with 0.8mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 255°C | 245–265°C |
| Bed Temperature | 80°C | 75–85°C |
| Retraction Distance | 0.8 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 14 mm³/s | — |
| Chamber Temperature | 35°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab A1 Combo | Brand | Bambu Lab |
| Type | Open Bed Slinger | Material | PETG Basic (PETG) |
| Drive | Direct Drive | Density | 1.27 g/cm³ |
| Nozzle | Stainless Steel 0.4mm | Drying | 70°C / 6hrs |
| Material | PETG | Filament Brand | Bambu Lab |
💡 Maker's Notes: PETG multi-color printing with AMS Lite works reliably. Use textured PEI plate for PETG. AMS Lite keeps PETG dry between color changes
🔗 Other Filaments for Bambu Lab A1 Combo
Bambu Lab PLA Basic — 220°C / 60°C bed • PLAeSun PLA+ — 225°C / 60°C bed • PLASunlu PLA Meta — 205°C / 55°C bed • PLA