Anycubic Kobra 3 Slicer Profile for Duramic PETG
Reference starting points for Anycubic Kobra 3 and Duramic PETG: 240°C nozzle / 80°C bed, with 1.0mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 240°C | 230–250°C |
| Bed Temperature | 80°C | 70–85°C |
| Retraction Distance | 1.0 mm | — |
| Retraction Speed | 30 mm/s | — |
| Max Volumetric Speed | 8 mm³/s | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Anycubic Kobra 3 | Brand | Duramic |
| Type | Bed Slinger | Material | PETG (PETG) |
| Drive | Direct Drive | Density | 1.27 g/cm³ |
| Nozzle | Bronze 0.4mm | Drying | 65°C / 6hrs |
| Material | PETG | Filament Brand | Duramic |
💡 Maker's Notes: Duramic PETG on the Kobra 3 — budget PETG that prints reliably at standard settings. Use draft shield on the open-frame Kobra 3. Slow speed to 50mm/s. Textured PEI plate recommended. Dry filament before use.
🔗 Other Filaments for Anycubic Kobra 3
eSun PLA+ — 210°C / 60°C bed • PLASunlu PETG — 240°C / 80°C bed • PETG