Qidi Tech X-Max 3 Slicer Profile for eSun PLA+
Reference starting points for Qidi Tech X-Max 3 and eSun PLA+: 210°C nozzle / 60°C bed, with 0.6mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 210°C | 200–220°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 20 mm³/s | — |
| Chamber Temperature | 40°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Qidi Tech X-Max 3 | Brand | eSun |
| Type | Enclosed CoreXY | Material | PLA+ (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 50°C / 4hrs |
| Material | PLA | Filament Brand | eSun |
💡 Maker's Notes: X-Max 3 with 350°C nozzle capability — overkill for PLA but the enclosed CoreXY platform delivers excellent print quality. Open the chamber door for PLA to prevent heat creep. The 325mm build volume enables large PLA parts.
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Qidi Tech X-Max 3
Sunlu PETG — 250°C / 80°C bed • PETG