Prusa MK4 Slicer Profile for Polymaker PolyLite ASA
The Prusa MK4 printing Polymaker PolyLite ASA (ASA) performs best at 260°C nozzle / 105°C bed with 0.6mm retraction. Tested by PrusaFanatic.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 260°C | 250–270°C |
| Bed Temperature | 105°C | 95–115°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 40 mm/s | — |
| Max Volumetric Speed | 20 mm³/s | — |
| Chamber Temperature | 55°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Prusa MK4 | Brand | Polymaker |
| Type | Enclosed Ready | Material | PolyLite ASA (ASA) |
| Drive | Direct Drive | Density | 1.07 g/cm³ |
| Nozzle | Brass 0.4mm | Drying | 80°C / 8hrs |
💡 Maker's Notes: MK4 enclosure is NOT sealed — add draft shield for large ASA prints. Glue stick required
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Prusa MK4
Prusament PLA — 215°C / 60°C bed • PLAPrusament PETG — 250°C / 85°C bed • PETGeSun PLA+ — 215°C / 60°C bed • PLAFillamentum PLA Extrafill — 210°C / 60°C bed • PLAPrusament PVB — 220°C / 75°C bed • PVBPolymaker PolyFlex TPU95 — 230°C / 50°C bed • TPU