Elegoo Neptune 4 Max Slicer Profile for Overture PLA
Reference starting points for Elegoo Neptune 4 Max and Overture PLA: 210°C nozzle / 60°C bed, with 0.6mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 210°C | 200–220°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 16 mm³/s | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Elegoo Neptune 4 Max | Brand | Overture |
| Type | Bed Slinger | Material | PLA (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Bronze 0.4mm | Drying | 50°C / 4hrs |
| Material | PLA | Filament Brand | Overture |
💡 Maker's Notes: Overture PLA on the Neptune 4 Max — a reliable workhorse for large-format printing. The 480mm Z-height enables tall prints. Consistent flow rate at high speeds. Use textured PEI plate for best adhesion on the large bed.
🔗 Other Filaments for Elegoo Neptune 4 Max
eSun PLA+ — 210°C / 60°C bed • PLAPolymaker PolyLite PLA — 205°C / 60°C bed • PLASunlu PETG — 245°C / 80°C bed • PETG