Creality Ender 5 Plus Slicer Profile for Overture Easy PLA
Reference starting points for Creality Ender 5 Plus and Overture Easy PLA: 205°C nozzle / 60°C bed, with 5.0mm retraction. These settings have not been independently tested by this site; verify the filament maker's guidance and calibrate your own setup.
🧪 Calibrate before a large print. Results vary with machine, nozzle, filament batch, humidity, and slicer. These are reference values, not verified or guaranteed settings. Check the filament manufacturer's published range and use a small test print to tune one variable at a time.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 205°C | 195–215°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 5.0 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 10 mm³/s | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Creality Ender 5 Plus | Brand | Overture |
| Type | Bed Slinger | Material | Easy PLA (PLA) |
| Drive | Bowden | Density | 1.24 g/cm³ |
| Nozzle | Bronze 0.4mm | Drying | 50°C / 4hrs |
| Material | PLA | Filament Brand | Overture |
💡 Maker's Notes: Overture Easy PLA is forgiving on the Bowden-based Ender 5 Plus. Wide temperature window. Retraction 5mm at 45mm/s. Use glass bed with glue stick for the large 350mm bed. Good for large decorative prints.
🔗 Other Filaments for Creality Ender 5 Plus
eSun PLA+ — 210°C / 60°C bed • PLAHatchbox PLA — 215°C / 60°C bed • PLASunlu PETG — 245°C / 80°C bed • PETG