Bambu Lab X1C Slicer Profile for Polymaker PolyLite ABS
The Bambu Lab X1C printing Polymaker PolyLite ABS (ABS) performs best at 255°C nozzle / 105°C bed with 0.5mm retraction. Tested by FilamentFox.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 255°C | 245–265°C |
| Bed Temperature | 105°C | 95–110°C |
| Retraction Distance | 0.5 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 20 mm³/s | — |
| Chamber Temperature | 55°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab X1C | Brand | Polymaker |
| Type | Enclosed CoreXY | Material | PolyLite ABS (ABS) |
| Drive | Direct Drive | Density | 1.04 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 85°C / 8hrs |
💡 Maker's Notes: X1C is the ultimate ABS printer — heated chamber at 55°C eliminates warping entirely. No glue stick needed on engineering plate
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab X1C
Prusament PETG — 250°C / 85°C bed • PETGPolymaker PolyMax PLA — 210°C / 60°C bed • PLA