Bambu Lab P1P Slicer Profile for Polymaker PolyLite PLA
The Bambu Lab P1P printing Polymaker PolyLite PLA (PLA) performs best at 205°C nozzle / 60°C bed with 0.6mm retraction. Tested by P1Pilot.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 205°C | 195–215°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 18 mm³/s | — |
| Chamber Temperature | 40°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab P1P | Brand | Polymaker |
| Type | Enclosed CoreXY | Material | PolyLite PLA (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Hardened Steel 0.4mm | Drying | 50°C / 4hrs |
💡 Maker's Notes: Polymaker PolyLite PLA prints at slightly lower temps than eSun. P1P high-speed Kinematics handle it easily at 18mm³/s flow
🔗 Other Filaments for Bambu Lab P1P
eSun PLA+ — 210°C / 60°C bed • PLASunlu PETG — 240°C / 80°C bed • PETG