Bambu Lab A1 Mini Slicer Profile for Bambu Lab PLA Matte
The Bambu Lab A1 Mini printing Bambu Lab PLA Matte (PLA) performs best at 225°C nozzle / 60°C bed with 0.6mm retraction. Tested by MiniMaker.
🧪 Always Print a Temp Tower First. 3D printing results vary with ambient temperature, humidity, and machine variation. The settings below are community-tested starting points — run a temperature tower calibration before committing to a large print. Especially for new spools of filament.
🔧 Slicer Parameters
| Parameter | Recommended Value | Range |
|---|---|---|
| Nozzle Temperature | 225°C | 215–235°C |
| Bed Temperature | 60°C | 55–65°C |
| Retraction Distance | 0.6 mm | — |
| Retraction Speed | 45 mm/s | — |
| Max Volumetric Speed | 16 mm³/s | — |
| Chamber Temperature | 35°C | — |
📋 Printer & Filament Details
| Printer | Details | Filament | Details |
|---|---|---|---|
| Model | Bambu Lab A1 Mini | Brand | Bambu Lab |
| Type | Open Bed Slinger | Material | PLA Matte (PLA) |
| Drive | Direct Drive | Density | 1.24 g/cm³ |
| Nozzle | Stainless Steel 0.4mm | Drying | 50°C / 4hrs |
💡 Maker's Notes: PLA Matte needs slightly higher temp than PLA Basic for layer adhesion
🩺 Print Defects This Profile Helps Avoid
🔗 Other Filaments for Bambu Lab A1 Mini
Bambu Lab PLA Basic — 220°C / 60°C bed • PLABambu Lab PETG Basic — 255°C / 80°C bed • PETGeSun PLA+ — 225°C / 60°C bed • PLASunlu PLA Meta — 205°C / 55°C bed • PLAPolymaker PolyTerra PLA — 210°C / 55°C bed • PLA